Door card removal
1. Unscrew door lock pin cover
2. Remove the screw covers
3. Remove both screws
4. Pull the door card from either handle or storage compartment to unclip
5. Unplug speaker cable and electric mirror adjuster if applicable
6. Repeat steps backwards to reinstall
Tweeter removal
1. Unscrew the tweeter from door card by twisting left
2. Cut glue using razor blade (Use heat if possible)
3. Bend back/break off clips (Use heat if possible)
4. Remove tweeter from housing
5. Push clips back in
Adapter installation
1. Attach new speakers to adapter as seen below
2. Tighten nuts using pliers or similar tool
3. Line up OEM speaker grill with notch
4. Screw the speakers onto speaker grill/door card
Speaker wiring
1. Plug spade connectors onto speaker
2. Cut OEM connector
3. Place both new speaker wires through connector holes as seen below and press closed with
pliers
4. Follow the same steps as above however with the connector flipped